HANNA HI 180 Compact Magnetic Mini-Stirrer

HANNA HI 180 Compact Magnetic Mini-Stirrer

• Round edge
• Dynamic design; Easy to handle, these lightweight and compact stirrers need little room and are quickly recognizable on busy benches
• Built to last; Glass-free chemical resistant housing resists damage by accidental falls

Common stirrers are manufactured with steel and aluminum components. These units are often too large and heavy to fit in the limited space of a laboratory. HANNA HI 180 series is compact, lightweight, inexpensive and designed in a special round shape without any sharp corners.
Often, in the lab, a sample is removed from a typical stirrer before reducing the speed. Normally, this would cause the motor to accelerate until it is destroyed. Not so with HANNA stirrers. HANNA stirrers incorporate electronic controls that allow the user to regulate the speed with greater precision. In addition to speed control, a Speedsafe™ mechanism will assure that the maximum speed will never be exceeded.
HI 180 mini-stirrers are available in nine colors. Several HI 180 stirrers can be placed on a laboratory bench with their colors helping to identify the different samples.
 
Order Information:

All models are supplied with micro stir bar and instructions
HI 180A-1 Light yellow mini-stirrer (115V)
HI 180A-2 Light yellow mini-stirrer (230V)
HI 180B-1 Light sea-green mini-stirrer (115V)
HI 180B-2 Light sea-green mini-stirrer (230V)
HI 180B-3 Light sea-green mini-stirrer (AUS plug)
HI 180C-1 Light blue mini-stirrer (115V)
HI 180C-2 Light blue mini-stirrer (230V)
HI 180C-3 Light blue mini-stirrer (AUS plug)
HI 180D-1 Yellow mini-stirrer (115V)
HI 180D-2 Yellow mini-stirrer (230V)
HI 180E-1 Green mini-stirrer (115V)
HI 180E-2 Green mini-stirrer (230V)
HI 180F-1 Blue mini-stirrer (115V)
HI 180F-2 Blue mini-stirrer (230V)
HI 180F-3 Blue mini-stirrer (AUS plug)
HI 180G-1 Red mini-stirrer (115V)
HI 180G-2 Red mini-stirrer (230V)
HI 180H-1 Grey mini-stirrer (115V)
HI 180H-2 Grey mini-stirrer (230V)
HI 180H-3 Grey mini-stirrer (AUS plug)
HI 180I-1 Ivory mini-stirrer(115V)
HI 180I-2 Ivory mini-stirrer (230V)
HI 180I-3 Ivory mini-stirrer (AUS plug)
HI 180I/MB Ivory mini-stirrer (12 VDC)
 
Specifications

Maximum Stirring Capacity		1 liter (0.26 gallons)
Speed Range	Min.	100 rpm
	Max.	1000 rpm
Power Supply		110/115 VAC or 220/240 VAC, 50/60 Hz
Installation Category		II
Cover Material		ABS plastic
Environment		0 to 50°C (32 to 122°F); RH max 95%
Dimensions		137 mm (dia) x 51 mm (h)
Weight		640 g (1.4 lb.)

Read More

HANNA HI 190M-0 Mini Magnetic Stirrer with Speedsafe

HANNA HI 190M-0 Mini Magnetic Stirrer with Speedsafe

• Compact size - The compact size of this stirrer allows users to maximize bench space for efficiency and safety.
• Safety - Speedsafe™ limits the maximum speed to 1000 rpm even if a load is suddenly removed.
• Built to last - The ABS housing of HI 190 M-0 resists most harmful chemicals in the lab.

The HI 190M-0 is compact and lightweight, so that lack of laboratory bench space is no longer a concern.
This stirrer incorporates electronic controls that allow the user to regulate the speed with greater precision. Often, in the lab, a sample is removed from the stirrer before reducing the speed. This would cause the motor of conventional equipment to accelerate until it is destroyed. This does not pose a problem with HANNA mini-stirrers. In fact, the internal Speedsafe™ mechanism will ensure that the maximum speed is never exceeded.
HI 190M-0 comes supplied with an ABS cover that will resist the harmful effects of chemicals that are accidentally spilled.

Order Information:
HI 190M-0 mini-stirrer with ABS cover, 12 Vdc is supplied with micro stir bar and instructions.

Specifications

Maximum Stirring Capacity		1 liter (0.26 gallons)
Speed Range	Min.	100 rpm
	Max.	1000 rpm
Power Supply		12 Vdc
Installation Category		II
Cover Material		ABS plastic
Environment		0 to 50°C (32 to 122°F); RH max 95%
Dimensions		120 x 120 x 45 mm (4.8 x 4.8 x 1.8")
Weight		610 g (1.3 lb.)

Read More

HANNA HI 200M Mini Magnetic Stirrer with Speedsafe with stainless steel cover

HANNA HI 200M Mini Magnetic Stirrer with Speedsafe with stainless steel cover

• Compact size - The compact size of this stirrer allows users to maximize bench space for efficiency and safety.
• Safety - Speedsafe™ limits the maximum speed to 1000 rpm even if a load is suddenly removed.
• Built to last - The stainless steel of HI 200M resists most harmful chemicals in the lab.

The HI 200M is compact and lightweight, so that lack of laboratory bench space is no longer a concern.

This stirrer incorporates electronic controls that allow the user to regulate the speed with greater precision. Often, in the lab, a sample is removed from the stirrer before reducing the speed. This would cause the motor of conventional equipment to accelerate until it is destroyed. This does not pose a problem with HANNA mini-stirrers. In fact, the internal Speedsafe™ mechanism will ensure that the maximum speed is never exceeded.
HI 200M has an AISI 316 stainless steel cover. This model is ideal for applications that create exothermic reactions.

Order Information:
HI 200M mini-stirrer with stainless steel cover, is supplied with micro stir bar and instructions.

Specifications

Maximum Stirring Capacity		1 liter (0.26 gallons)
Speed Range	Min.	100 rpm
	Max.	1000 rpm
Power Supply		110/115 Vac or 230/240 Vac, 50/60 Hz
Installation Category		II
Cover Material		AISI 316 Stainless Steel
Environment		0 to 50°C (32 to 122°F); RH max 95%
Dimensions		120 x 120 x 45 mm (4.8 x 4.8 x 1.8")
Weight		710 g (1.6 lb.)

Read More

HANNA HI 304N Auto-Reverse Magnetic Stirrer with Tachometer

HANNA HI 304N Auto-Reverse Magnetic Stirrer with Tachometer
 
When stirring a solution, to work with a constant speed is an important factor in ensuring that the best repeatability in tests and processes is achieved. Without a tachometer, there is no way of knowing the RPMs.
 
HI 304N is a heavy-duty stirrer with a built-in tachometer. It is often desirable to stir in two directions in order to achieve maximum homogeneity. An advanced circuit allows HI 304N to reverse the direction of the stir at a user selected interval. The interval can be adjusted from 30 seconds up to 3 minutes. In addition to precision speed control, a limiter will also assure that the maximum speed will never be exceeded (Speedsafe™). Often, a sample is removed from the stirrer before the uses reduces the speed with ordinary stirrers. This can cause the motor to accelerate until it is destroyed. HANNA stirrers incorporate a VCO device that will stop the motor from accelerating as soon as the load is removed.
 
Order Information:
 
The HI 304N magnetic stirrer, stainless steel cover, micro stir bar and instructions.
 
Specifications

Maximum Stirring Capacity		2.5 liter
Speed Range	Low	100 rpm
	High	800 to 1000 rpm
Tachometer		4-digit LCD
Reverse Interval		from 30 seconds to 3 minutes
Power Supply		110/115 Vac or 230/240 Vac, 50/60 Hz
Installation Category		II
Cover Material		AISI 316 Stainless Steel
Environment		0 to 50°C (32 to 122°F); RH max 95%
Dimensions		180 x 180 x 70 mm (7.1 x 7.1 x 2.8")
Weight		1.4 kg (3.1 lb.)

Read More

HANNA HI 303N Two-Speed Magnetic Stirrer with Tachometer

HANNA HI 303N Two-Speed Magnetic Stirrer with Tachometer

QC stations and labs must be able to repeat tests and processes. In order to do this, the specifications must be clear at all times. When stirring a solution, the RPMs are a very crucial factor. Without a tachometer, there is no way of knowing the exact RPMs and therefore no way of repeating the process. 

The HI 303N solves this problem by incorporating an LCD tachometer. These stirrers also allow precise stirring repeatability by using two separate ranges. In each range, the speed can be fine tuned for exacting accuracy. This assures maximum repeatability in experiments and processing for laboratory as well as production use.

In addition to speed control, a limiter will assure that the maximum speed will never be exceeded (Speedsafe™). HANNA stirrers incorporate VCO device that will stop the motor from accelerating as soon as the load is removed.

Order Information:
The HI 303N magnetic stirrer, stainless steel cover, micro stir bar and instructions.

Specifications

Maximum Stirring Capacity		2.5 liter
Speed Range	Low	100 to 500 rpm
	High	100 to 1000 rpm
Tachometer		0 to 1000 rpm
Power Supply		110/115 Vac or 230/240 Vac, 50/60 Hz
Installation Category		II
Cover Material		AISI 316 Stainless Steel
Environment		0 to 50°C (32 to 122°F); RH max 95%
Dimensions		180 x 180 x 70 mm (7.1 x 7.1 x 2.8")
Weight		1.4 kg (3.1 lb.)

Read More

HANNA HI 300N Heavy-Duty Magnetic Stirrer with 2.5 liter capacity

HANNA HI 300N Heavy-Duty Magnetic Stirrer with 2.5 liter capacity
 
HI 300N is a heavy-duty stirrer. HI 300N can stir up to 2.5 liters (0.66 gallons) of liquid. This makes it perfect for laboratory use as well as use in production. Electronic controls are incorporated into this stirrer that allows the user to regulate the speed with greater precision. With HANNA ’s Speedsafe™, a limiter will assure that the maximum speed will never be exceeded.

Order Information:

The HI 300N magnetic stirrer, stainless steel cover, is supplied with micro stir bar and instructions.
 
Specifications

Maximum Stirring Capacity		2.5 liter
Speed Range	Low	100 rpm
	High	800 to 1000 rpm
Power Supply		110/115 Vac or 230/240 Vac, 50/60 Hz
Installation Category		II
Cover Material		AISI 316 Stainless Steel
Environment		0 to 50°C (32 to 122°F); RH max 95%
Dimensions		180 x 180 x 70 mm (7.1 x 7.1 x 2.8")
Weight		1.4 kg (3.1 lb.)

Read More

IKA RH basic bundle

Description :

Package includes

• RH basic
• ETS-D5  FREE
• H 44 Boss head clamp
• H 16 V Support rod
• H 16.3 Extension
• H 38 Holding rod

Newly designed, economic magnetic stirrer with heating. Bushing according to DIN 12878 for connecting an electronic contact thermometer, such as the ETS-D5. Highly accurate temperature control is possible with sensor placed directly in the medium. High heat output of 600 watts and stainless steel compound hot plate ensures rapid heating. Adjustable safety temperature from 100 to 360 °C.

• Soft-start of the stirring motor
• Includes M 10 thread for a support rod
• Strong magnetic field and wide speed range for volumes up to 15 liters

Technical Data :

Number of stirring positions	1
Stirring quantity max. per stirring position (H2O)	15 l
Motor rating output	2 W
Direction of rotation	left
Speed display set-value	scale
Speed control	Turning knob
Speed range	100 - 2000 rpm
Stirring bar length min.	20 mm
Stirring bar length max.	80 mm
Self-heating of the hotplate by max. stirring (RT:22°C/duration:1h)	28 +K
Heat output	600 W
Temperature display set-value	scale
Temperature unit	°C
Heating temperature range	50 - 320 °C
Heat control	scale
Temperature setting range min.	0 °C
Temperature setting range max.	320 °C
Connection for ext. temperature sensor	ETS-D5
Characteristics in the medium with temperature sensor	1l M50 Oil at H1500
Heating rate medium	6 K/min
Adjustable safety circuit min.	100 °C
Adjustable safety circuit max.	360 °C
Set-up plate material	stainless steel 1.4301
Set-up plate dimensions	Ø 135 mm
Automatic reverse rotation	no
Intermittend mode	no
Viscosity trend measurement	no
Break detection stirring bar	no
Timer	no
pH measurement	no
Graph function	no
Programs	no
Sensor in medium detection (Error 5)	no
Weighing function	no
Dimensions (W x H x D)	160 x 100 x 250 mm
Weight	2.8 kg
Permissible ambient temperature	5 - 40 °C
Permissible relative humidity	80 %
Protection class according to DIN EN 60529	IP 21
RS 232 interface	no
USB interface	no
Analog output	no
Voltage	230 / 115 / 100 V
Frequency	50/60 Hz
Power input	620 W

Read More

IKA RET control-visc white

Description :

PATENTED WORLD FIRST: Safety magnetic stirrer with heating and integrated balance. Clear, multilingual TFT display makes it easy to set all parameters.
 
Integrated temperature control feature enables connection of a temperature probe, placed directly in the medium, to control medium temperature with a high degree of precision. PT 100 temperature sensor is included. The stainless steel composite hot plate with white ceramic coating, reaching a temperature of 340 °C, enables rapid heating and very good chemical resiatance.
 
RS 232 and USB interfaces enable pc control of the magnetic stirrer and documentation of all test parameters. "Lock" function prevents inadvertent changes of speed and temperature settings. As a safety feature, the current temperature is displayed when the unit is switched off but surface is still hot. Below 50 °C the display turns off automatically.

• BNC socket for connection of a pH electrode
• Adjustable temperature control mode: rapid heating and very accurate temperature control
• Dual sensor for simultaneous control of heat transfer fluid temperature and medium temperature
• Timer and countdown functions
• Display of viscosity change trend
• Detached magnet detection
• Intermittent operation
• Several modes of operation available
• Safety circuit adjustable from 50 to 380°
• Transparent protective cover included
• Error code display for easy troubleshooting
• Exact temperature and speed adjustment by means of digital display; even when function switched off
• Suitable for unsupervised operation
• Sealed casing (IP 42) ensures a long service life

Technical Data :

Number of stirring positions	1
Stirring quantity max. per stirring position (H2O)	20 l
Motor rating output	9 W
Direction of rotation	right
Speed display set-value	TFT
Speed display actual-value	TFT
Speed control	Turning knob
Speed range	50 - 1700 rpm
Setting accuracy speed	10 rpm
Stirring bar length min.	20 mm
Stirring bar length max.	80 mm
Self-heating of the hotplate by max. stirring (RT:22°C/duration:1h)	28 +K
Heat output	600 W
Temperature display set-value	TFT
Temperature display actual-value	TFT
Temperature unit	°C / °F
Heating temperature range	Room temp. + device self heating - 340 °C
Heat control	Turning knob
Temperature setting range min.	0 °C
Temperature setting range max.	340 °C
Temperature setting resolution of heating plate	0.1 K
Connection for ext. temperature sensor	PT100/PT1000 (dual sensor)
Characteristics in the medium with temperature sensor	1l M50 Oil at H1500
Temperature medium max.	270 °C
Heating rate medium	7 K/min
Temperature setting resolution of medium	0.1 K
Adjustable safety circuit min.	50 °C
Adjustable safety circuit max.	380 °C
Set-up plate material	technical enamel
Set-up plate dimensions	Ø 135 mm
Automatic reverse rotation	no
Intermittend mode	yes
Viscosity trend measurement	yes
Break detection stirring bar	yes
Timer	yes
pH measurement	yes
Graph function	yes
Programs	yes
Sensor in medium detection (Error 5)	yes
Weighing function	yes
Weighing range	10-5000 g
Weighing accuracy	<500g : +/-1g , >500g: +/-5g
Load capacity weighing function max.	5 kg
Dimensions (W x H x D)	160 x 85 x 270 mm
Weight	2.7 kg
Permissible ambient temperature	5 - 40 °C
Permissible relative humidity	80 %
Protection class according to DIN EN 60529	IP 42
RS 232 interface	yes
USB interface	yes
Analog output	no
Voltage	220 - 240 / 115 / 100 V
Frequency	50/60 Hz
Power input	650 W

Read More

IKA RET control visc

Description :

PATENTED WORLD FIRST: Safety magnetic stirrer with heating and integrated balance. Clear, multilingual TFT display makes it easy to set all parameters.
Integrated temperature control feature enables connection of a temperature probe, placed directly in the medium, to control medium temperature with a high degree of precision. PT 100 temperature sensor is included. The stainless steel composite hot plate, reaching a temperature of 340 °C, enables rapid heating.
 
RS 232 and USB interfaces enable pc control of the magnetic stirrer and documentation of all test parameters. "Lock" function prevents inadvertent changes of speed and temperature settings. As a safety feature, the current temperature is displayed when the unit is switched off but surface is still hot. Below 50 °C the display turns off automatically.

• BNC socket for connection of a pH electrode
• Adjustable temperature control mode: rapid heating and very accurate temperature control
• Dual sensor for simultaneous control of heat transfer fluid temperature and medium temperature
• Timer and countdown functions
• Display of viscosity change trend
• Detached magnet detection
• Intermittent operation
• Several modes of operation available
• Safety circuit adjustable from 50 to 380°
• Transparent protective cover included
• Error code display for easy troubleshooting
• Exact temperature and speed adjustment by means of digital display; even when function switched off
• Suitable for unsupervised operation
• Sealed casing (IP 42) ensures a long service life

Technical Data :

Number of stirring positions	1
Stirring quantity max. per stirring position (H2O)	20 l
Motor rating output	9 W
Direction of rotation	right
Speed display set-value	TFT
Speed display actual-value	TFT
Speed control	Turning knob
Speed range	50 - 1700 rpm
Setting accuracy speed	10 rpm
Stirring bar length min.	20 mm
Stirring bar length max.	80 mm
Self-heating of the hotplate by max. stirring (RT:22°C/duration:1h)	28 +K
Heat output	600 W
Temperature display set-value	TFT
Temperature display actual-value	TFT
Temperature unit	°C / °F
Heating temperature range	Room temp. + device self heating - 340 °C
Heat control	Turning knob
Temperature setting range min.	0 °C
Temperature setting range max.	340 °C
Temperature setting resolution of heating plate	0.1 K
Connection for ext. temperature sensor	PT100/PT1000 (dual sensor)
Characteristics in the medium with temperature sensor	1l M50 Oil at H1500
Temperature medium max.	270 °C
Heating rate medium	7 K/min
Temperature setting resolution of medium	0.1 K
Adjustable safety circuit min.	50 °C
Adjustable safety circuit max.	380 °C
Set-up plate material	stainless steel 1.4301
Set-up plate dimensions	Ø 135 mm
Automatic reverse rotation	no
Intermittend mode	yes
Viscosity trend measurement	yes
Break detection stirring bar	yes
Timer	yes
pH measurement	yes
Graph function	yes
Programs	yes
Sensor in medium detection (Error 5)	yes
Weighing function	yes
Weighing range	10-5000 g
Weighing accuracy	<500g : +/-1g , >500g: +/-5g
Load capacity weighing function max.	5 kg
Dimensions (W x H x D)	160 x 85 x 270 mm
Weight	2.7 kg
Permissible ambient temperature	5 - 40 °C
Permissible relative humidity	80 %
Protection class according to DIN EN 60529	IP 42
USB interface	yes
RS 232 interface	yes
Analog output	no
Voltage	220 - 240 / 115 / 100 V
Frequency	50/60 Hz
Power input	650 W

Read More

IKA RCT basic IKAMAG® safety control

Description :

The improvement of the bestseller: Now with new technology for more capacity
New: New: stronger motor for a higher range of speeds
New: Additional temperature control mode for faster heating of medium

• Integrated temperature control
• Incl. PT 1000 temperature sensor (PT 1000.60)
• Exact temperature and speed setting via digital display, even when switched off
• Set safety temperature limit displayed digitally
• Hot Top indicator >> hot surface warning to prevent burns!
• Digital error code display
• With adjustable safety circuit of heating plate temperature (50 - 360 °C)
• Safety magnetic stirrer with heating, suitable for unsupervised operation
• Bushing according to DIN 12878 for connecting a contact thermometer, e.g. ETS-D5, enables precise temperature control
• High level of safety thanks to improved heat control technology
• Enclosed assembly (IP 42) guarantees long service life
• Highly polished aluminium heating plate for optimum heat transfer
• Improved magnetic adhesion
• Incl. protection cover H 100

Technical Data :

Number of stirring positions	1
Stirring quantity max. per stirring position (H2O)	20 l
Motor rating output	9 W
Direction of rotation	right
Speed display set-value	LED
Speed display actual-value	LED
Speed control	Turning knob
Speed range	50 - 1500 rpm
Setting accuracy speed	1 rpm
Stirring bar length min.	20 mm
Stirring bar length max.	80 mm
Self-heating of the hotplate by max. stirring (RT:22°C/duration:1h)	28 +K
Heat output	600 W
Temperature display set-value	LED
Temperature display actual-value	LED
Temperature unit	°C
Heating temperature range	Room temp. + device self heating - 310 °C
Heat control	Turning knob
Temperature setting range min.	0 °C
Temperature setting range max.	310 °C
Heating rate heating plate	6.5 K/min
Temperature setting resolution of heating plate	1 K
Connection for ext. temperature sensor	PT1000
Temperature setting resolution of medium	1 K
Adjustable safety circuit min.	50 °C
Adjustable safety circuit max.	360 °C
Set-up plate material	Aluminium alloy
Set-up plate dimensions	Ø 135 mm
Automatic reverse rotation	no
Intermittend mode	no
Viscosity trend measurement	no
Break detection stirring bar	no
Timer	no
pH measurement	no
Graph function	no
Programs	no
Sensor in medium detection (Error 5)	yes
Weighing function	no
Dimensions (W x H x D)	160 x 85 x 270 mm
Weight	2.5 kg
Permissible ambient temperature	5 - 40 °C
Permissible relative humidity	80 %
Protection class according to DIN EN 60529	IP 42
RS 232 interface	no
USB interface	no
Analog output	no
Voltage	220 - 230 / 115 / 100 V
Frequency	50/60 Hz
Power input	650 W

Read More

IKA RH basic

Description :

Newly designed, economic magnetic stirrer with heating. Bushing according to DIN 12878 for connecting an electronic contact thermometer, such as the ETS-D5. Highly accurate temperature control is possible with sensor placed directly in the medium. High heat output of 600 watts and stainless steel compound hot plate ensures rapid heating. Adjustable safety temperature from 100 to 360 °C.

• Soft-start of the stirring motor
• Includes M 10 thread for a support rod
• Strong magnetic field and wide speed range for volumes up to 15 liters

Technical Data :
 

Number of stirring positions	1
Stirring quantity max. per stirring position (H2O)	15 l
Motor rating output	2 W
Direction of rotation	left
Speed display set-value	scale
Speed control	Turning knob
Speed range	100 - 2000 rpm
Stirring bar length min.	20 mm
Stirring bar length max.	80 mm
Self-heating of the hotplate by max. stirring (RT:22°C/duration:1h)	28 +K
Heat output	600 W
Temperature display set-value	scale
Temperature unit	°C
Heating temperature range	50 - 320 °C
Heat control	scale
Temperature setting range min.	0 °C
Temperature setting range max.	320 °C
Connection for ext. temperature sensor	ETS-D5
Characteristics in the medium with temperature sensor	1l M50 Oil at H1500
Heating rate medium	6 K/min
Adjustable safety circuit min.	100 °C
Adjustable safety circuit max.	360 °C
Set-up plate material	stainless steel 1.4301
Set-up plate dimensions	Ø 135 mm
Automatic reverse rotation	no
Intermittend mode	no
Viscosity trend measurement	no
Break detection stirring bar	no
Timer	no
pH measurement	no
Graph function	no
Programs	no
Sensor in medium detection (Error 5)	no
Weighing function	no
Dimensions (W x H x D)	160 x 100 x 250 mm
Weight	2.8 kg
Permissible ambient temperature	5 - 40 °C
Permissible relative humidity	80 %
Protection class according to DIN EN 60529	IP 21
USB interface	no
RS 232 interface	no
Analog output	no
Voltage	230 / 115 / 100 V
Frequency	50/60 Hz
Power input	620 W

Read More