Fluke 726 Multifunction Process Calibrator

Fluke 726 Multifunction Process Calibrator

THE FLUKE 726 WILL INTERPRET RESULTS WITHOUT THE HELP OF A CALCULATOR AND STORE MEASUREMENT DATA FOR LATER ANALYSIS

INSTRUMENT FEATURES

The Fluke 726 Precision Multifunction Process Calibrator is designed specifically for the Process industry with broad workload coverage, calibration power and unsurpassed accuracy in mind. The 726 measures and sources almost all process parameters and can calibrate almost anything.
The Fluke 726 delivers accuracies of 0.01 percent, and measures and sources key process parameters including volts, mA, RTDs, thermocouples, frequency, resistance and pressure.

Fluke 726 Process Calibrator Features

Accuracies of 0.01%.
Measure, source and view process signals simultaneously.
Measure volts, mA, RTDs, thermocouples, frequency & resistance to test sensors and transmitters.
Source/simulate volts, mA, thermocouples, RTDs, frequency & pressure to calibrate transmitters.
Memory storage for up to 8 calibration results.
Transmitter error % calculation.
Perform fast linearity tests with auto step and auto ramp features.
Store frequently-used test setups for later use.
New voltage input protection design for improved reliability.
Dimensions: (H x W x D) 200 x 96 x 47 mm.
Weight: 0.65kg.

Included Accessories:
AC72 alligator clips, set of stackable test leads, set of TL 75 testleads, Fluke 726 user manuals.

Read More

Fluke 789 Process Meter

Fluke 789 Process Meter

THE FLUKE 789 PROCESSMETER LETS PROCESS TECHNICIANS DO A LOT MORE WHILE CARRYING A LOT LESS

INSTRUMENT FEATURES

The Fluke 789 Process Meter combines a DMM and a Loop Calibrator in one rugged, handheld tool, for about the price you would expect to pay for a loop calibrator alone, making it an ideal maintenance tool. The Fluke 789 also features an IR port which allows logged data to be transferred to the optional FlukeView forms software for graphic analysis and reporting.
The Fluke 789 has a 24-Volt loop supply reducing the need for taking a separate power supply when doing offline transmitter testing. And with its built-in, selectable 250-Ohm Hart resistor, it also eliminates the need to carry a separate resistor with you.

Fluke 789 Process Meter Features

DMM and Loop Calibrator in one tool.
Precision 1000V, 440 mA True RMS Digital Multimeter.
DC current source and Loop Calibrator.
24 V Loop power supply.
Min/Max / Average / Hold / Relative Modes.
Diode Test and Continuity Beeper.
Manual Step (100%, 25%, Coarse, Fine) plus Auto Step & Auto Ramp.
Simultaneous mA and % of scale read-out.
HART mode setting.
Infrared I/O serial port.
Dimensions: 203 x 100 x 50mm.
Weight: 0.6kg.

Included Accessories:
TL71 test lead set, AC72 alligator clips, batteries, Fluke 789 user manual & quick user guide.

Read More

Fluke 715 Volt/mA Calibrator

Fluke 715 Volt/mA Calibrator
OFFERED IN THE RUGGED FLUKE 80 SERIES DMM PACKAGE, THE 715 CALIBRATOR IS COMPACT, LIGHTWEIGHT AND EASY TO CARRY

INSTRUMENT FEATURES
The Fluke 715 Volt / mA Calibrator is a source and measurement tool for 0 to 24 mA current loop testing and dc voltage from 0 to 20/25 V. The calibrator does not source and measure simultaneously.
The Fluke 715 Volt / mA Calibrator delivers outstanding performance, durability and reliability. With a push button interface similar to the multifunction Fluke 740 Series Documenting Process Calibrators, the 715 is easy to use. It is EMI tolerant, dust and splash resistant, and features a removable battery door for quick battery changes.

Fluke 715 Volt/mA Calibrator Features
Measure loop current (0-20 mA, 4-20 mA) signals.
Measure voltage output process signals from PLCs, transmitters.
Source or simulate 24 mA loop current.
Source voltage to 100 mV or 10V.
24V loop supply with simultaneous current measurement.
Enhanced voltage and current measure and source accuracy.
250 ohm HART resistor with loop power.
Holster features test lead storage.
Step and linear ramp output function.
Configurable zero and span settings.
Power requirements: Single 9V battery.
Dimensions: 52 (H) x 98 (W) x 201 (L) mm.
Weight: 601g (21.2 oz).

Included Accessories:
The Fluke 715 is supplied with a holster, a set of test leads, an installed 9V alkaline battery, and instruction sheet.

Read More

Fluke 754 Documenting Process Calibrator-HART

Fluke 754 Documenting Process Calibrator-HART
CALIBRATE TEMPERATURE, PRESSURE, VOLTAGE, CURRENT, RESISTANCE, AND FREQUENCY. SINCE IT BOTH MEASURES & SOURCES, YOU CAN TROUBLESHOOT AND CALIBRATE WITH ONE RUGGED TOOL

INSTRUMENT FEATURES
The Fluke 754 is a power multifunction documenting calibrator that lets you download procedures, lists, and instructions created with software-or upload data for printing, archiving, and analysis. The Fluke 754 also features a powerful built in HART interface capable of performing nearly all the day-to-day tasks you now perform with a separate communicator.
The Fluke 754 works with the Fluke DPC / TRACK2 software, and with popular programs from Honeywell Meridium, Emerson, Cornerstone, Yokogawa, Prime Technologies, Intergraph and others. It allows you to create procedures, instructions, and action lists to deliver fast, easy documentation.

Fluke 754 Process Calibrator Features
Measure: volts, mA, RTDs, thermocouples, frequency, and ohms.
Source / simulate: volts, mA, thermocouples, RTDs, frequency, ohms, and pressure.
Power transmitters during test using loop supply.
Measure / source pressure using any of 29 Fluke 700Pxx Pressure Modules.
Create and run automated as-found / as-left procedures.
Holds up to a full week of downloaded procedures and calibration results.
Multi lingual interface.
Bright white dual display.
Delivered with DPC / Track Sample software.
Approvals: CAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-1:1993.
Dust / water resistance: Meets IP52, IEC 529.
Batteries: Internal Battery Pack Li-ion: 7.2V, 4400mAh, 30 Wh.
Battery Life: >8 hours typical.
Dimensions: 136 x 245 x 63mm (5.4 x 9.6 x 2.5 inch).
Weight: 1.2 kg (2.7 lb).

Included Accessories:
BC7240 battery charger, Li-on BP7240 battery pack, DPCTrack 2 Sample Software, Fluke 754 Instruction manual, NIST-traceable calibration report and data, 3 sets of TP220 test probes with three sets of “extended tooth alligator clips, 2 sets AC280 hook clips, C799 Soft Field Case, USB communication cable and Fluke 754HHC HART communications cable.

Read More

Fluke 707 Loop Calibrator

Fluke 707 Loop Calibrator
A HIGH PERFORMANCE SOLUTION FOR CALIBRATION, REPAIR AND MAINTENANCE OF CURRENT LOOPS

INSTRUMENT FEATURES
The Fluke 707 is a fast, one-handed tool for loop checks. Just click to calibrate. This feature-rich solution combines the best features of a push-button and knob-base loop calibrator.

Fluke 707 Loop Calibrator Features
Voltage measure: Range: 0 to 28V - Resolution: .001V.
mA measure: Range: 0 to 24mA - Resolution: .001 mA.
mA source: Range: 0 to 24mA - Resolution: .001 mA.
mA simulate: Range: 0 to 24 mA - Resolution: .001 mA.
Loop supply: Range: 24 V dc.
Maximum voltage: 30 volts.
'Quick Click' detented rotary knob for one handed operation.
Higher accuracy: 0.015%.
Mains Voltage Input protection.
250 Ohm loop resistance for with Hart instrumentation.
Dimensions: 164 x 75 x 47 mm.
Weight: 0.35kg.

Included Accessories:
C10 protective yellow holster, TL75 test leads, AC72 alligator test clips & Fluke 707 instruction sheet.

Read More

Fluke 705 Loop Calibrator

Fluke 705 Loop Calibrator
A SOURCE AND MEASUREMENT TOOL FOR 0 TO 20MA OR 4 TO 20MA CURRENT LOOP TESTING AND FOR DC VOLTAGE FROM 0 TO 28V

INSTRUMENT FEATURES
The Fluke 705 is a feature-rich solution to loop calibration, maintenance and repair offers: A large display and simple, pushbutton interface for ease of use.

Fluke 705 Loop Calibrator Features
mA sourcing, simulation and measurement.
0.02% accuracy and 0.001 mA resolution.
Simultaneous mA and % of span display.
Selectable slow ramp, fast ramp, and step function.
24 V Loop supply with mA measure.
0 - 28 VDC measurement to check Loop Voltage.
0 - 20 mA or 4 - 20 mA default start up modes.
Easy battery exchange without opening the case.
Power: 9V battery.
Dimensions: 152 x 70 x 41mm.
Weight: 340g.

Included Accessories:
C10 protective yellow holster, TL75 test leads, AC72 alligator test clips & Fluke 705 instruction sheet.

Read More

CONSTANT LOOP20 Loop Calibrator

CONSTANT LOOP20 Loop Calibrator
FEATURES

• 4-20mA Output
• Auto Power Off
• High Accuracy and Rapid Response
• Step, Ramp, and Auto Output
• Low Battery Indication
• Easy To Use

Power Supply : 9V battery (ANSI/NEDA 1604A or IEC 6LR619V alkaline)
Operating Temperature : 0°C ~ 50°C
Operating relative humidity : ≤80% RH
Storage Temperature : ≤-10°C~55°C
Storage Relative Humidity : ≤90% RH
Size : 200x100x40mm (with holster)
Weight : 550g (with holster)
Standard Accessories : manual, industrial test lead (with alligator clips attached to probes)
Optional Accessories : AC power-supply adapter

Specification

Output	Measuring Range	Output Range (mA)	Resolution	Accuracy	Remark
Current	20mA	0.000 ~ 22.000	0.001mA	±0.05% of set value or ±4µA	Max. 1KΩ at 20mA (see manual for detail)
Simulation of Transmitter	-20mA	0.000 ~ 22.000	0.001mA	±0.05% of set value or ±4µA	Max. 1KΩ at 20mA (see manual for detail)
Loop Power	24V	-	-	±4%	Max. output current up to 25mA

Input	Range	Input Range	Resolution	Accuracy	Remark
Voltage	28V	-0.200 ~ 28.000V	1mV	±0.02% of reading or ±2mV	Input resistance 2MΩ
Current	20mA	-1.000 ~ 22.000mA	0.001mA	±0.02% of reading or ±4µA	Input resistance 10Ω
Loop	20mA	0.000 ~ 22.000mA	0.001mA	±0.02% of reading or ±4µA	Providing 24V loop power

Read More

CONSTANT TEMP40 Temperature Calibrator

CONSTANT TEMP40 Temperature Calibrator

Features

• Auto Power off
• High accuracy and rapid response
• Low battery indication
• Easy to use

Spesifications :
Power Supply : 9V battery (ANSI/NEDA 1604A or IEC 6LR619V alkaline)
Operating Temperature : 0°C ~ 50°C
Operating Relative Humidity : ≤80% RH
Storage Temperature : ≤-10°C ~ 55°C
Storage Relative Humidity : ≤90% RH
Size : 200x100x40mm (with holster)
Weight: 550g (with holster)
Standard Accessories : manual, industrial test lead (with alligator clips attached to probes)
Optional Accessories : AC power-supply adapter

Function	Reference	Range	Resolution	Accuracy	Remark
DC Voltage	100mV	-10.00 ~ 110.00mV	0.01mV	±0.05% of set value or ±30µV	Maximum ouput current : ±2mA
	1000mV	-100.00 ~ 1100.00mV	0.1mV	±0.05% of set value or ±0.3mV
OHM	400Ω	0.0 ~ 400Ω	0.1Ω	±0.05% of set value or ±0.2Ω	±1mA excite current
TC	R	-40°C ~ 1760°C	1°C	±0.05% of set value or ±3°C (≤100°C) ±0.05% of set value or ±2°C (>100°C)	By Using ITS-90 temperature scale
	S	-20°C ~ 1760°C
	B	400°C ~ 1800°C	1°C	±0.05% of set value or ±3°C (400°C ~ 600°C) ±0.05% of set value or ±2°C (>600°C)
	E	-200.0°C ~ 1000.0°C	0.1°C	±0.05% of set value or ±2°C (≤-100°C) ±0.05% of set value or ±1°C (>-100°C)
	K	-200.0°C ~ 1370.0°C	0.1°C
	J	-200.0°C ~ 1200.0 °C	0.1°C
	T	-200.0°C ~ 400.0 °C	0.1°C
	N	-200.0°C ~ 1300.0 °C	0.1°C
RTD	Pt100-385	-200.0°C ~ 850.0°C	0.1°C	±0.05% of set value or ±0.6°C	By using temperature scale Pt100-385.
	Pt200-385	-50.0°C ~ 150 °C	0.1°C

Read More

Fluke 724 Temperature Calibrator

Fluke 724 Temperature Calibrator

Overview

Built for the masters of temperature.

The Fluke 724: everything you need to troubleshoot and calibrate temperature.

• Now you can carry one tool to expertly test all the temperature sensors and transmitters in your plant.
• The Fluke 724 is the master’s answer to temperature calibration. The Fluke 724 can measure and source 10 thermocouple types and 7 RTD types, plus volts and ohms.
• The Fluke 724 even handles high-speed pulsed RTD circuits and provides loop power.
• The dual line measure/source display lets you source temperature and view loop current at the same time.
• With its simple, “no menus controls, the Fluke 724 is easy to operate, too.

Feel the Heat!

The new Fluke 724 Temperature Calibrator is a powerful yet easy-to-use calibrator. Use the measure and source functions to test and calibrate almost any temperature instrument.

• Easy to read dual display lets you view input and output simultaneously
• Measure RTDs, thermocouples, ohms, and volts to test sensors and transmitters
• Source/simulate thermocouples, RTDs, volts, and ohms to calibrate transmitters
• Perform fast linearity tests with 25% and 100% steps
• Execute remote tests with auto step and auto ramp
• Power transmitters during test using loop power supply with simultaneous mA measurement
• Store frequently-used test setups for later use
• Compact, streamlined shape makes it easy to carry
• Rugged, reliable design stands up to field use
• Backlight lets you work in poor light
• Large battery capacity of four AA cells
• Battery door for easy changes

Specifications

Measurement Accuracy
Voltage DC	30.000 V               0.02%+ 2 counts (upper display) 20.000 V               0.02%+ 2 counts (lower display) 100.00 mV           0.02%+ 2 counts -10.00 mV to 75.00 mV   0.025 % + 1 count (via TC connector)
Current DC	24.000 mA           0.02%+ 2 counts
Resistance	0.0 to 400.0 Ω     0.1Ω (4-wire), 0.15Ω (2- and 3-wire) 401 to 1500 Ω     0.5Ω (4-wire), 1Ω (2- and 3-wire) 1500 to 3200 Ω   1Ω (4-wire), 1.5Ω (2- and 3-wire)
Source Accuracy
Voltage DC	100.00 mV           0.02%+2 counts 10.000 V               0.02%+2 counts -10.00 mV to 75.00 mV   0.025 % + 1 count (via TC connector)
Resistance	15.0 to 400.0 Ω  0.15 Ω (exc. current 0.15 to 0.5 mA), 0.1Ω (exc. current 0.5 to 2 mA) 401 to 1500Ω 0.5 Ω (excitation current 0.05 to 0.8 mA) 1500 to 3200 Ω 1 Ω(excitation current 0.05 to 0.4 mA)
RTDs and Thermocouples
Measure Accuracy:	NI-120 0.2°C PT-100 (385) 0.33°C PT-100 (393) 0.3°C PT-100 (JIS) 0.3°C PT-200 (385) 0.2°C PT-500 (385) 0.3°C PT-1000 (385) 0.2°C Resolution 0.1°C J : 0.7°C K : 0.8°C T : 0.8°C E : 0.7°C R : 1.8°C S : 1.5°C B : 1.4° L : 0.7°C U : 0.75°C N : 0.9°C Resolution J, K, T, E, L, U: 0.1°C, 0.1°F B, S : 1°C, 1°F XK 0.6°C BP 1.2°C
Source Accuracy:	NI-120 0.2°C PT-100 (385) 0.33°C PT-100 (393) 0.3°C PT-100 (JIS) 0.3°C PT-200 (385) 0.2°C PT-500 (385) 0.3°C PT-1000 (385) 0.2°C Resolution 0.1°C Note : Accuracy stated for 4-wire measurement J : 0.7°C K : 0.8°C T : 0.8°C E : 0.7°C R : 1.8°C S : 1.5°C B : 1.4° L : 0.7°C U : 0.75°C N : 0.9°C Resolution J, K, T, E, L, U: 0.1°C, B, R, S : 1°C XK 0.6°C BP 1.2°C
Specifications
Ramp Functions	Source functions : Voltage, current, resistance, frequency, temperature Ramps : Slow ramp, Fast ramp, 25% step-ramp
Loop Power Function	Voltage : 24V Accuracy : 10% Maximum Current : 22 mA, short circuit protected
Step Functions	Source functions : Voltage, current, resistance, frequency, temperature Steps : 25% of range, 100% of range
Environmental Specifications
Operating Temperature	-10ºC to 55ºC
Storage Temperature	-20ºC to 71ºC
Humidity (Without Condensation)	90% 10°C to 30°C 75% 30°C to 40°C 45% 40°C to 50°C 35% 50°C to 55°C
Safety Specifications
Safety Rating	CSA C22.2 No. 1010.1:1992
EMC	EN50082-1:1992 and EN55022:1994 Class B
Mechanical & General Specifications
Size	96 x 200 x 47 mm
Weight	650 g
Batteries	Four AA alkaline batteries.
Warranty	Three years
Battery Life	25 hours typical
Shock & Vibration	Random, 2G, 5-500 Hz

Model Name	Description	Price List
Fluke 724	Temperature Calibrator including: AC70A Test Clips One pair of stackable test leads TL75 Test Leads CE and CSA Markings Manuals in English, French, German, Spanish, Italian, Portugese, Korean, Chinese and Japanese Users manuals on CD-ROM NIST- traceable calibration report and data

Read More