UbiNS UBA-9290 RF Field Strength Analyzer

UbiNS UBA-9290 RF Field Strength Analyzer

The UBA-9290 is a portable RF Field Strength Analyzer with spectrum capability. It is the ideal instrument for measuring  RF signals within a frequency range of 100 kHz to 2.9 GHz. 

The UBA-9290 is designed for various applications related to the general analysis, maintenence and service of RF systems including cable tv, RFID, Telecommunications, TV cell phone equipment and WiFi. The low noise floor of -117 dBm allows the user to observe and analyze even weak signals. The UBA-9290's basic spectrum analyzer capabilities makes it well suited for many field applications, laboratory use and even on the production line.  

This is a cost effective and powerful tool for engineers, scientists and technicians involved in RF signal analysis available for a fraction of the cost for a full featured standard spectrum analyzer.

This Field Strength Analyzer features a user friendly interface making it quite easy to use. Settings and measurements are conveniently set and it also allows for 100 user defined presets such as predefined ranges or channel settings and other special functions that are frequently used in communication systems. This frequency analyzer supports high speed USB and ships with software that allows the user to control the UBA-2900 from a Personal Computer. Measurements may be stored on the P.C. for additional analysis.

 UBA-9290 Features:

• Handheld portable functionality
• Battery operated
• 6 Ni-MH rechargeable batteries are included
• Padded case with storage cells
• 100 kHz to 2.9 GHz measurement range: Span Range 1 MHz to 1 GHz.
• 320 x 240TFT Colour LCD Display.
• Very High Sensitivity: -117 dBm
• Integrated Frequency Counter. Range: 9MHz to 2.1 GHz
• Modes: Spectrum Analyzer, Bar Graph (5/11/21/51/101/201 Channels, Single Bar, Difference)
• Sweep Mode (Free Run, Single Run, Squelch Run)
• Markers: 1,2, Delta, Peak, Center
• Memory: 100 Waveforms / Settings
• Manufactured in South Korea by UBINS
• 1 year limited warranty

General Specifications:
Frequency

• Frequency Range: 100 kHz to 2900 MHz
• Basic Accuracy: TXO: +/- 2.5 parts per million
• Receiver sensitivity: 0 – 6 dBu EMF (S/N 10 dB @ W-FM, 12 dB @ N-FM)
• Resolution: 5 kHz & multiples of 5kHz
• Stepping range: Multiples of 5 kHz and 6.25 kHz
• Span: 1 MHz to 1 GHz

Amplitude

• Units: dBm, dBmV, dBuV
• Ranges:
  • -32 to – 117 dBm (N-FM)
  • -22 to – 107 dBm (W-FM, AM, SSB)
  • Resolution: 0.1 dB
  • Accuracy: 2 dB (23°C +/- 3°C)
  • Bandwidth: N-FM: 12.5 kHz, W-FM: 180 kHz, AM/SSB: 2.4 kHz
  • Attenuator: 10, 20, 30 & 35 dBm
  • Spurious noise level: -45 dBc (N-FM), -35 dBc (W-FM)
  • Input impedance: 50 Ohms / 75 Ohms
  • Antenna/Input Connector: N-type female
  • Max input level: 10 dBm, 5 Vrms

Sweep

• Speed: 500 milli seconds
• Trigger source: N-FM, W-FM, SSB, AM
• Trigger mode: Free, single, squelch, continuous
• Marker mode: Off, 1, 2, delta, peak, center

Memory

• Trace & setting storage: 100 waveforms and settings

Display

• Type: TFT Color 320 x 240

Frequency Counter

• Frequency Range: 9 MHz to 2100MHz
• Connector: BNC female
• Input Impedance: 50 Ohms
• Resolution / # of Digits: 1 kHz, 7 digits
• Accuracy: 50 ppm, +/- 1 count
• Sampling Time: 512 ms
• Input sensitivity:
  • 150 mV ( 9 MHz – 2.1 GHz)
  • 100 mV ( 20 MHz – 1.0 GHz)
  • Maximum input voltage: 5 Vrsm
  • Computer Interface
  • USB: Cable included

Audio

• Output: 1 Watt into an 8 Ohm speaker

Power

• Battery: 6 each AA-Type, Ni-MH 1.2V, 2.700 mAh, rechargeable batteries (included)
• AC Power Adapter/Charger: 9 volts DC, Universal 100- 240VAC, 50-60Hz input

Environment

• Operating Temperature: 0°C to 40°C
• Relative humidity: 35 to 85%, non condensing
• Storage temperature: -10°C to 50°C

Physical Specifications

• Dimensions: 82mm x 20mm5 x 36 mm (3.2 x 8.1 x 1.4 inches)
• Weight (w/o batteries): 395 grams (0.87 lbs)

Read More

ATTEN AT5030 Spectrum Analyzer 0.15~3000MHz

ATTEN AT5030 Spectrum Analyzer  0.15~3000MHz

QUICK OVERVIEW

ATTEN AT5030 SPECTRUM ANALYZER 0.15~3000MHz

1. Satellite receiver system
2. Radio communication system
3. Mobile phone base station system field strength measurements of radiation

PRODUCT DESCRIPTION

Summary :

AT5030 Spectrum Analyzer is a low cost, high performance digital synthesized and frequency-scanning and super heterodyne RF measurement instrument with frequency upto 3 GHz. These advanced features tunes within the frequency range by electro scanning and the frequency ponderance of its spectrum will be sampled according to the time. Therefore, the scanning and tuning spectrum analyzer can display the cycle signal and random signal.
In the AT5030, there are kinescope and separately-packaged equipment, which are exported. AT5030 can test the signal with the range 0.15 ~ 3000MHz. And the center frequency can be adjusted through slightly tuning and roughly, which can form a sample measurement of frequency, with 100KHz/case ~ 100MHz/case added. A 4-and-half digits display can be chosen as center frequency or marked frequency reading.
The Spectrum Analyzer AT5030 can carry out good inspection of the faults of cable system and wireless system including remote control, cordless phones, cable TV and communication equipments, as well as good comparison and analysis of frequency of signals.

Features:

• Compact and Easy to be carry
• Frequency range : 0.15~3000MHz
• (detailed ranges: 0.15 1000 MHz; 1000MHz 2000MHz; 2000MHz 3000MHz)
• 4 and half Digital display (center frequency, 0.1MHz resolvability)
• -100~+13dbm amplitude range, 20KHz, 400KHz 4 KHz video filter.
• Excellent Noise floor performance

Applications:

Test cable TV levels and frequency response Educational Training Institutions Test master antenna TV systems Measure communications transmitter spurious radiation Locate sources of EMI Measure unwanted RF radiation

Technical Specifications :

Frequency range:0.15 3000MHz(detailes ranges:0.15 1000MHz;1000MHz 2000MHz; 2000MHz 3000MHz)
Display accuracy of center frequency: ±2% x spectrum width + 5 x 10-3* center frequency 100KHz
Mark accuracy: ±0.1% frequency width +100KHz
Frequency display resolution:100KHz(4 and a half LED)
Scanning-frequency width:100KHz/case~100MHz/case and level1.2.5.0Hz/case(0 scanning) Accuracy : ±10%
Frequency stability : better than 150KHz/h Middle-frequency(-3dB):20KHz;400KHz,video filter(pass);4KHz
Scanning Velocity:43Hz Scope Range -100~+13dBm Screen display range:80dB(10dB/case) Reference level of electricity : -27dBm~+13dBm
Average noise level of electricity : -90dBm(bandwidth 20KHz) Tortiontwice ,three times wave<-55dBc
Sensitivity : better than 90dBm Real Scale: ±2dB

Read More

GW Instek GSP-830 Spectrum Analyzer

GW Instek GSP-830 Spectrum Analyzer
Features

• Low Noise Floor(-117dBm@1GHz, 3k RBW)
• Sequence Programming Functions
• ACPR, OCBW, Channel Power, N-dB and Phase Jitter Measurements
• 10 Markers with Delta Marker, Peak Functions
• AC/DC/Battery(Option)three modes of power supply
• USB/RS-232C/GPIB(Option) Interface
• 6.4" TFT Color LCD, Resolution: 640x480
• Optional Tracking Generator
• Optional Preamplifier

Description

3GHz Spectrum Analyzer
Featuring high performance, uncompromised design, and remote monitoring software, the GSP-830 3GHz Spectrum Analyzer is the latest evolution from GWInstek. The GSP-830 is one of the most advanced Spectrum Analyzer GWInstek has produced to date. The GSP-830 has an exceptional noise floor of -152dBm/Hz; combined with the optional GAP-802 preamplifier, the noise floor can reach a remarkable -172dBm/Hz. With a low noise floor, the GSP-830 is more than capable of finding limits; Trace Detection, combined with an easy-to-use interface, makes the GSP-830 an ideal solution for spectrum analysis. Using the Auto Sequence mode, advanced users can define their own macros in 10 Sequence sets. Repeat or Single run mode can be used to streamline repetitive tasks. PC connection is effortless and versatile supporting USB host/device, RS232C, VGA and GPIB (optional) for remote monitoring, control and analysis.
 
KEY FEATURES
GW Instek now extends its Spectrum Analyzer product series up to 3GHz. As a new member, the GSP-830 inherits the advantages of high performance, affordable cost, ease of use, and light-weight portability, which are common in GW Instek products. Moreover, its extremely low noise floor greatly increases the measurement range, an advanced user interface brings a significant visual enhancement, and the rich measurement functions make measurements simple and easy. The GSP-830 offers the greatest performance/price 
value in the market.

Wide Measurement Range
With GW Instek's state-of-the-art design, the GSP-830's outstanding low noise floor level of -152dBm/Hz at 1GHz has extreme sensitivity for picking up weak signals. Along with the GAP-802 20dB-gain preamplifier, the GSP-830 reaches an equivalent noise floor level as low as -172dBm/Hz, further extending the measurement range.

Automatic Measurement
The GSP-830 can act as an automatic test instrument to eliminate the need for external computer control. Macros can be defined through the front panel keypad and stored into 10 Sequence sets. A sequence can include pause steps that can be used for observing the measurement results when necessary. Repeat or Single run mode can be selected based on application requirements.

Portable Power Operations
Equipped with two packs of Li-ion batteries, the GSP-830 can maintain normal operation for more than 3 hours. In DC operation mode, the GSP-830 can be powered by a 12-Volt power supply or a standard cigarette lighter in an automobile. The large internal memory of the GSP-830 means mass storage of measured traces, setup information, limit lines and user-defined macros is possible. With USB flash drive support for mass storage, weighing 6kg and a compact size, the GSP-830 is also a convenient tool for service engineers out in the field.

Advanced User Interface
The user-oriented interface design of the GSP-830 gives users the pleasure of handling complicated measurements with ease. A high-resolution 6.4" color TFT LCD provides crisp and clear images. Colored, user-defined traces allow small disparities to be seen at a glance. The Split-Window mode allows simultaneous monitoring of two different frequency bands on a single display. Under this split-window mode, the GSP-830 acts like two spectrum analyzers packed into single unit.

Feature-Rich Interface
The USB host port on the front panel supports flash drives for various functions, including loading/saving setup information, tracing data, and capturing screens. The rear panel USB slave port is used for PC remote control. The GSP-830's screen image can be sent directly to external monitors through the VGA port on the rear panel. These features make it easy to remotely monitor the results in special circumstances, such as EMI testing, group presentations, or discussions.

Free PC Software for the GSP-830
Through RS-232 or USB connection, EagleShot can transfer measurement data from the GSP-830 to a PC. Data can be printed as graphs or saved as a text file for further analysis. With the EagleShot software, the limit lines can be uploaded from the GSP-830 or edited directly on the PC. For marking and reading the captured signals on the PC screen, markers can be placed directly on the PC display as easily as doing it on the GSP-830 front panel. The latest version of EagleShot supports the GSP-830 in various application fields whilst maintaining compatibility with the GSP-827.
 
Specification

FREQUENCY
Frequency Range	9kHz ~ 3GHz
Aging Rate	± 10ppm, 0~50°C, 5ppm/yr
Span Range	2kHz ~ 3GHz in 1-2-5 sequence, full span, zero span
Phase Noise	-80dBc/Hz @1GHz 20kHz offset typical
Sweep Time Range	50ms ~ 25.6s
RESOLUTION BANDWIDTH
RBW Range	3kHz, 30kHz, 300kHz, 4MHz
RBW Accuracy	15%
Video Bandwidth Range	10Hz ~ 1MHz in 1-3 steps
AMPLITUDE
Measurement Range	-103dBm ~ +20dBm: 1MHz ~ 15MHz, Ref.Level @ -30dBm  -117dBm ~ +20dBm: 15MHz ~ 1GHz, Ref.Level ≧-110dBm  -114dBm ~ +20dBm: 1GHz ~ 3GHz, Ref.Level ≧-110dBm  (Span = 50kHz, RBW = 3kHz)
Overload Protection	Max. +30dBm, ±25VDC
Reference Level Range	-110dBm ~ +20dBm
Accuracy	±1dB @100MHz
Frequency Flatness	±1dB
Display Range Linearity	±1dB over 70dB
DYNAMIC RANGE
Average Noise Floor	<-135±1dBm/Hz: 1MHz ~ 15MHz, Ref.Level @ -30dBm  <-149dBm/Hz, typical -152dBm/Hz: 15MHz ~ 1GHz, Ref.Level ≧-110dBm  <-146dBm/Hz, typical -149dBm/Hz: 1GHz ~ 3GHz, Ref.Level ≧-110dBm
Third Inter-Modulation	<-70dBc RF Input @-40dBm, Ref.Level @-30dBm
Harmonic Distortion	<-60dBc RF Input <-40dBm Typical, Ref.Level @-30dBm
Non-Harmonic Spurious	<-93dBm, 1MHz ~ 15MHz, Ref.Level @-30dBm <-107dBm ~ +20dBm: 15MHz ~ 1GHz, Ref.Level ≧-110dBm  <-104dBm ~ +20dBm: 1GHz ~ 3GHz, Ref.Level ≧-110dBm  (Span = 50kHz, RBW = 3kHz)
GENERAL
Display	640 x 480 high resolution TFT color LCD
Split Windows	Active Window: Upper, Lower or Alternate (two simultaneously sweeping windows)
Markers	10 Markers for peaks: 5 normal-delta marker pairs Functions: Delta, To Peak, To Minimum, Peak Track, Peak Table, Peak Sort
Trace Detection	3 traces with Peak, Maximum hold, Freeze, Average, Trace math
Power Measurement	ACPR, OCBW, Channel Power, N dB and Phase Jitter
Autoset Function	Auto tuning the measurement result for observation
Trigger	Conditions: Video, External (Positive-going, +5V TTL external signal)  Mode: Normal, Single, Continuous
Sequence	Automated test by user-defined macros without any remote controller, 10 Sequential macro set and 10 macros per each set, Variable delays and wait-to-go facilitate automated measurement, Do-sequence links and nests different sequence sets.
CONNECTORS
RF Input	N female, 50Ω nominal RF input VSWR: <2:1, @0dBm Reference Level
External Reference	Type: BNC female
Clock Input	1M, 1.544M, 2.048M, 5M, 10M, 10.24M, 13M, 15.36M, 15.4M, 19.2MHz
Reference Clock Output	Type: BNC female, 10MHz
DC Input (DC Power Operation)	Jack : 5.5mm, 12V
DC Output (for GAP-801)	Type: SMB Male, outputs +9V/100mA Max.
INTERFACE
RS-232C	Sub-D 9 pins female
USB Connector	USB Host/Device full speed supported
VGA Output	Front panel: Type A receptacle for USB flash devices
Option: GPIB Interface	Fully programmable with IEEE 488.2 compliance
POWER SOURCE
	AC 100 ~ 240V, 50/60Hz
ACCESSORIES
	User Manual x 1 Power Cord x 1 USB Cable (Type A plug to Type mini-B plug) x1
DIMENSIONS & WEIGHT
	330(W) x 170(H) x 340(D) mm Approx. 6kg

Accessories
User Manual x 1
Power Cord x 1
USB Cable (Type A plug to Type mini-B plug) x1

Opt. 01	Tracking Generator	- Frequency Range: 9k~3GHz - Amplitude Range: -50dBm~0dBm - Amplitude Accuracy: ±1dB@100MHz, 0dBm - Amplitude Flatness: ±1dB@0dBm - Harmonics: <-30dBc typical - Reverse Power: +30dBm - Impedance: Type: N female, 50Ω nominal - RF output VSWR: < 2:1
Opt. 02	Battery pack	*  11.1V Li-Ion battery pack *2
Opt. 03	± 1ppm Stability	*   ±1ppm, 0~50 °C , ±1ppm/yr
Opt. 04	300Hz RBW	*   RBW 300Hz, 3dB bandwidth, RBW Accuracy: 20%
Opt. 05	EMI Filter 9kHz & 120kHz RBW(*)	*   RBW selections: 9kHz & 120kHz, 6dB bandwidth, Accuracy: 15%
Opt. 06	10kHz & 100kHz RBW (*)	*   RBW selections: 10kHz & 100kHz, 3dB bandwidth,  Accuracy: 15%
Opt. 07	Demodulator (*)	* Demodulation: AM/ FM * Output: Internal speaker, 3.5mm stereo jack wired for mono operation * RBW selection: 10kHz & 100kHz, 3dB bandwidth, Accuracy: 15%
Opt. 08	GPIB Interface	*   IEEE 488 bus
Note: 1. (*) Only one option can be selection between Opt. 05, 06, 07 2. All options are factory-installed except opt.02.

OPTIONAL ACCESSORIES
ATA-001	BNC Antenna (An additional ADP-001 is needed for fitting GSP spectrum analyzers)
ATA-002	Near Field Probe (An additional ADP-001 & GTL-110 is needed for fitting GSP spectrum analyzers)
GAP-801	Preamplifier Preamplifier with 10dB(typical), gain 9kHz ~ 6GHz
GAP-802	Preamplifier Preamplifier with 20dB(typical), gain 9kHz ~ 3GHz
RLB-001	Return Loss Bridge RLB Frequency Range 10MHz ~ 1GHz
GTP-3000	Passive touch Probe Set PR-03: Passive touch probe, SMA(F) ADP-002: Adaptor, SMA(J/F) ~ N(P/M) GTL-303: RF Cable Assembly, SMA(P/M), 600mm
GKT-001	General Kit set ADP-002: adaptor, SMA(J/F) ~ N(P/M) x 2 ATN-100: 10dB attenuator, N(J/F) ~ N(P/M) x 1 GTL-303: RF cable assembly(SMA(P/M),RD316,600mm)x2 GSC-002: Kit box x 1
GKT-002	CATV Kit set ADP-001: adaptor, BNC(J/F) ~ N(P/M) x 2 ADP-101: adaptor, BNC(J/F)75Ω ~ BNC(P/M)50Ωx 2 GTL-304: RF cable assembly(RG223,N(P/M)-N(J/F),300mm)x2 GSC-003: Kit box x 1
GKT-003	RLB Kit set GAK-001: termination 50 , N(P/M) x 1 GAK-002: Cap with chain, N(P/M) x 1 GTL-302: RF cable assembly(RG223,N(P/M),300mm)x2 GSC-004: Kit box x 1
GKT-006	EMI Probe Kit set ANT-01: 6cm Loop, H-Field Probe x 1 ANT-02: 3cm Loop, H-Field Probe x 1 ANT-03 6mm Stub tip, E- Field Probe x 1 PR-03: Touch Passive Probe x 1 ADP-02: N(P/M)~SMA(J/F) Adapter x 1 ADP-01: N(P/M)~BNC(J/F) Adapter x 1 Test Lead: BNC(P/M)~BNC(P/M) RF Cable x 1 Test Lead: SMA(P/M)~SMA(P/M) RF Cable x 1
GRA-404	Rack Adapter Panel Rack Mounting (19", 4U)
GSC-001	Soft Carrying Case
GTL-301	RF Cable RG 223 N(P/M), 1000mm
GTL-401	DC Power Cord DC power cord with DC Jack and lighter plug, Current 5A

Read More

GW Instek GSP-9300 Spectrum Analyzer

GW Instek GSP-9300 Spectrum Analyzer

Features

• Frequency Range: 9kHz ~ 3GHz
• High Frequency Stability: 0.025ppm
• 3dB RBW: 1Hz ~ 1MHz
• 6dB EMI Filter: 200Hz, 9kHz, 120kHz, 1MHz
• Phase Noise: -88dBc/Hz @1GHz, 10kHz Offset
• Built-in Measurement Functions: 2FSK Analysis, AM/FM/ASK/FSK Demodulation & Analysis, EMC Pre-test, P1dB point, Harmonic, Channel Power, N-dB bandwidth, OCBW, ACPR, SEM, TOI, CNR, CTB, CSO, Noise Marker, Frequency Counter, Time Domain Power, Gated Sweep
• Built-in Spectrogram and Topographic Display Modes
• 886MHz IF Output for User’s Extended Applications
• Remote Control Interface: LAN, USB, RS-232, GPIB (Optional)
• Built-in Preamplifier, 50dB Attenuator, and Sequence Function
• Optional 6GHz Power Sensor, Tracking Generator, Battery Back

Description

GSP-9300 is a light, compact and high C/P ratio 3GHz spectrum analyzer. The GSP-9300 frequency range stretches from 9kHz to 3GHz and features many functions such as radio frequency and power measurement, 2FSK digital communications analysis, EMC pretest, and active component P1dB point measurement, etc. It can support the fast sweep speed up to 307us. It is the ideal instrument for various application fields such as the basic operation of R&D, research and school lecture, engineering maintenance and test for mass production. This light and compact spectrum analyzer is also suitable for automatic test systems and vehicle mounted operation.

GW Instek understands that high quality is very important consideration for users who are selecting economical spectrum analyzers. GSP-9300, with the built-in preamplifier and the highest sensitivity of -152 dBm (1Hz), is capable of measuring very feeble signals. To obtain the accurate results, the low power measurement uncertainty of GSP-9300 is less than 1.5dB.

The built-in measurement functions of GSP-9300 spectrum analyzer unclude 2FSK digital communications analysis, AM/FM/ASK/FSK signal demodulation & analysis, EMC pretest mode, Harmonic Distortion, TOI, Channel Power, OCBW, ACPR, SEM, Phase Jitter, N-dB Bandwidth, Noise Marker, Frequency Counter and Time Domain power measurement for burst signal, etc.

Tracking generator, an option for GSP-9300 spectrum analyzer, provides supplementary functions such as measuring the insertion loss of RF cable and identifying the frequency response of antenna, filter or amplifier. The P1dB measurement function supports power sweep and P1dB compression point of active component. It supports 6.2GHz power sensor PWS-06. User, via the power meter mode, can conduct related measurement applications without using an independent power meter.

GSP-9300 spectrum analyzer is very user-friendly. All frequently used functions can be applied quickly through function keys and five languages (English, Russian, Traditional Chinese, Simplified Chinese and Japanese) are available for user interface.
Users can use the external software SpectrumShot for EMI test report management and assessment, remote control and waveform data recording for long periods of time. SpectrumShot can be applied to spectrum monitoring for detecting any abnormal radio signals. 

The software will send out e-mail to inform users if any abnormal situation occurs.
To summarize, GSP-9300 spectrum analyzer is a perfect, light, compact and economical measurement instrument. With height of 210mm and width of 350mm, GSP-9300 is suitable for automatic test systems. It can be mounted on the 19 inches 6U rack. The light and compact design of GSP-9300 is ideal for vehicle mounted operation to carry out field strength measurement such as monitoring satellite communications signals.

Specification
The specifications apply when the GSP-9300 is powered on for at least 30 minutes to warm-up to a temperature of 20°C to 30°C, unless specified otherwise.

Frequency
Frequency	Range	9 kHz to 3.0 GHz
	Resolution	1 Hz
Frequency Reference	Accuracy	±[(period since last adjustment X aging rate) + stability over temperature + supply voltage stability
	Aging Rate	±2 ppm max.	1 year after last adjustment
	Frequency Stability over Temperature	±0.025 ppm	0 to 50 °C
	Supply Voltage Stability	±0.02 ppm
Frequency Readout Accuracy	Start, Stop, Center, Marker	±(marker frequency indication X frequency reference accuracy + 10% x RBW +  frequency resolution*1)
	Sweep points	601	Span >= 100 Hz
		6 to 601	Span = 0 Hz
Marker Frequency Counter	Resolution	1 Hz, 10 Hz, 100 Hz, 1 kHz
	Accuracy	±(marker frequency indication X frequency reference accuracy + counter resolution)	RBW/Span >=0.02 ; Mkr level to DNL>30 dB
Frequency Span	Range	0 Hz (zero span), 100 Hz to 3 GHz
	Resolution	1 Hz
	Accuracy	± frequency resolution*1
Phase Noise	Offset from Carrier	Fc =1 GHz; RBW = 1 kHz, VBW = 10 Hz;Average ≥ 40
	10 kHz	<-88 dBc/Hz	Typical2
	100 kHz	<-95 dBc/Hz	Typical
	1 MHz	<-113 dBc/Hz	Typical
Resolution Bandwidth (RBW) Filter	Filter Bandwidth	1 Hz to 1 MHz in 1-3-10 sequence	-3dB bandwidth
		200 Hz, 9 kHz, 120 kHz, 1 MHz	-6dB bandwidth
	Accuracy	± 8%, RBW = 1 MHz	Nominal3
		± 5%, RBW < 1 MHz	Nominal
	Shape Factor	< 4.5:1	Normal Bandwidth ratio: -60dB:-3dB
Video Bandwidth (VBW) Filter	Filter Bandwidth	1 Hz to 1 MHz in 1-3-10 sequence	-3dB bandwidth
[1] Frequency Resolution = Span/(Sweep points - 1) [2] Typical specifications in this datasheet mean that the performance can be exhibited in 80% of the units with a 95% confidence level over the temperature range 20 to 30 °C. They are not covered by the product warranty. [3] Nominal values indicate expected performance. They are not covered by the product warranty.
Amplitude
Amplitude Range	Measurement Range	100 kHz to 1 MHz	Displayed Average Noise Level (DANL) to 18 dBm
		1 MHz to 10 MHz	DANL to 21 dBm
		10 MHz to 3 GHz	DANL to 30 dBm
Attenuator	Input Attenuator Range	0 to 50 dB, in 1 dB step	Auto or manual setup
Maximum Safe Input Level	Average Total Power	<= 33 dBm	Input attenuator  ≥10 dB
	DC Voltage	± 50 V
1 dB Gain Compression	Total Power at 1st Mixer	> 0 dBm	Typical;Fc ≥50 MHz; preamp. off
	Total Power at the Preamp	> -22 dBm
		mixer power level (dBm)= input power (dBm)-attenuation (dB)
Displayed Average Noise Level (DANL)*4	Preamp off	0 dB attenuation; RF Input is terminated with a 50 Ohm load. RBW 10 Hz; VBW 10 Hz; span 500 Hz; reference level =  -60dBm; trace average ≥ 40
		9 kHz to 100 kHz, < -93 dBm	Nominal
		100 kHz to 1 MHz, < -90 dBm - 3 x (f/100 kHz) dB
		1 MHz to 10 MHz, < -122 dBm
		10 MHz to 3 GHz, < -122 dBm
	Preamp on	0 dB attenuation; RF Input is terminated with a 50 Ohm load. RBW 10 Hz; VBW 10Hz; span 500 Hz;  reference level =  -60dBm; trace average ≥ 40
		100 kHz to 1 MHz, < -108 dBm - 3 x (f/100 kHz) dB	Nominal
		1 MHz to 10 MHz, < -142 dBm
		10 MHz to 3 GHz,  < -142 dBm + 3 x (f/1 GHz) dB
[4] DANL spec shall exclude the Spurious Response
Level Display Range	Scales	Log, Linear
	Units	dBm, dBmV, dBuV, V, W
	Marker Level Readout	0.01 dB	Log scale
		0.01 % of reference level	Linear scale
	Level Display Modes	Trace, Topographic, Spectrogram	Single / split Windows
	Number of Traces	4
	Detector	Positive-peak, negative-peak, sample,  normal, RMS(not Video)	Can be setup for each trace separately
	Trace Functions	Clear & Write, Max/Min Hold, View, Blank, Average
Absolute Amplitude Accuracy	Absolute Point	Center=160 MHz ; RBW 10 kHz; VBW 1 kHz; span 100 kHz; log scale;  1 dB/div; peak detector; 20 to 30°C; signal 0 dBm
	Preamp off	± 0.3 dB	Ref level 0 dBm; 10 dB RF attenuation
	Preamp on	± 0.4 dB	Ref level -30 dBm; 0 dB RF attenuation
Frequency Response	Preamp off	Attenuation: 10 dB; Reference: 160 MHz; 20 to 30°C
		100 kHz to 2.0 GHz	± 0.5 dB
		2.0GHz to 3.0 GHz	± 0.7 dB
	Preamp on	Attenuation: 0 dB; Reference: 160 MHz; 20 to 30°C
		1 MHz to 2.0 GHz	± 0.6 dB
		2.0GHz to 3.0 GHz	± 0.8 dB
Attenuation Switching Uncertainty	Attenuator setting	0 to 50 dB in 1 dB step
	Uncertainty	± 0.15 dB	reference: 160 MHz, 10dB attenuation
RBW Filter Switching Uncertainty	1 Hz to 1 MHz	± 0.25 dB	reference : 10 kHz RBW
Level Measurement Uncertainty	Overall Amplitude Accuracy	± 1.5 dB	20 to 30°C; frequency > 1 MHz; Signal input 0 to -50 dBm; Reference level  0 to -50 dBm;  Input attenuation 10 dB;   RBW  1 kHz; VBW 1 kHz; after cal; Preamp Off
		± 0.5 dB	Typical
Spurious Response	Second Harmonic Intercept	Preamp off; signal input -30dBm; 0 dB attenuation
		+35 dBm	Typical; 10 MHz < fc < 775 MHz
		+60 dBm	Typical; 775 MHz ≤ fc < 1.5 GHz
	Third-order Intercept	Preamp off; signal input -30dBm; 0 dB attenuation
		> 1dBm	300 MHz to 3 GHz
	Input Related Spurious	< -60 dBc	Input signal level -30 dBm, Att. mode, Att=0 dB; 20-30 degree C
	Residual Response (inherent)	<-90 dBm	Input terminated; 0 dB attenuation; Preamp off
Sweep
Sweep Time	Range	22ms to 1000s	Span >= 100 Hz
		50us to 1000s	Span = 0 Hz; Min Resolution = 10 us
	Sweep Mode	Continuous; Single
	Trigger Source	Free run; Video; External
	Trigger Slope	Positive or negative edge
RF Preamplifier
	Frequency Range	1 MHz to 3 GHz
	Gain	18 dB	Nominal (installed as standard)

Read More