HANNA HI 96712 Aluminum Portable Photometer
- CAL CHECK™
- User calibration
- Certified calibration and verification standards
- BEPS (Battery Error Prevention System)
- TIMER function
- Auto shut-off
- GLP Features
In spite of the fact that aluminum is very active chemically, it does not corrode in moist air the way iron does. Instead, it quickly forms a thin, hard coating of aluminum oxide.
Aluminum is used in water purification because when it reacts with lime (or any base), it forms a sticky precipitate of aluminum hydroxide that sweeps out tiny particles of impurities.
HI 96712 measures the aluminum content in water and wastewater in the 0.00 to 1.00 mg/L range.
The meter uses an exclusive positive-locking system to ensure that the cuvette is in the same place every time it is placed into the measurement cell.
Order Information:
HI 96712 is supplied with sample cuvettes with caps (2), 9V battery and instruction manual.
Specifications
Range |
|
0.00 to 1.00 mg/L |
Resolution |
|
0.01 mg/L |
Accuracy |
|
±0.02 mg/L ±4% of reading |
Light Source |
|
Tungsten Lamp |
Light Detection |
|
Silicon Photocell |
Battery Type / Life |
|
1 x 9V / approx. 40 hours of continuous use; auto-off after 10 minutes of non use |
Environment |
|
0 to 50°C (32 to 122°F); RH max 95% non-condensing |
Dimensions |
|
192 x 102 x 67 mm (7.6 x 4 x 2.6”) |
Weight |
|
290 g (10 oz.) |
Method |
|
Adaption of the aluminon method. The reaction between aluminum and reagents causes a reddish tint in the sample |
Typical EMC Dev. |
|
±0.01 mg/L |
0 komentar:
Posting Komentar