HIOKI 3129 PHASE DETECTOR

HIOKI PHASE DETECTOR 3129
Non-Metallic Contact 70V to 600V Phase Detector
Hioki’s non-contact voltage detection and measurement technology places efficiency and safety as priority considerations with the goal of protecting customers that need to conduct on-site electrical work as part of renovations and expansions of manufacturing plants and buildings. Model 3129 is a non-contact phase detector that can detect the phase of electrical current flow within insulated wires without the use of metallic contact voltage clips.
Overview

• Rotating LED indicator indicates the phase sequence for a 3-phase power supply at a glance
• Intermittent beeps signal positive phase; continuous tone signals reverse phase
• Magnetic base lets you secure the phase detector on a distribution panel
• Simply clip clamps onto wire insulation

·
<Compatible wires>
IV cable: Up to 100 mm^2
Specification

Functions	Phase detection (positive and negative)
Voltage detection method	Static induction
Voltage range	70 to 600 V AC (50/60 Hz) (sine wave,continuous input)
Frequency range	45 Hz to 66 Hz
Object to be connected	2.4 mm (0.09 in) to 17 mm (0.67 in) of insulated wiring IV, HIV cable: 2 to 100 mm^2 CV cable: 2 to 60 mm^2
Display	Phase detection :Positive ; 4 LEDs lit in clockwise order and the buzzer sounds intermittently Negative ; 4 LEDs lit in counterclockwise order and the buzzer sounds continuously
Battery check function	Power ON lamp: lights up (Power ON), blinks (Battery LOW)
Auto power off	Auto shut off if no activity is detected after power is turned ON for 15 minutes
Power supply	R6P (AA) manganese battery ×2, Continuous use: 70 hr
Dimensions and mass	70 mm (2.76 in) W × 75 mm (2.95 in) H × 30 mm (1.18 in) D, 200 g (7.1 oz), Cord length : 0.7 m (2.30 ft)
Accessories	Carrying case ×1, Strap ×1, Spiral tube ×1, Instruction manual ×1, R6P (AA) manganese battery ×2