Kyoritsu 1061 Digital Multimeter

Kyoritsu 1061 Digital Multimeter
High Accuracy, High Performance and Reliable Measurements

• 0.02% basic DC accuracy
• Large display with 50,000 counts
• Dual display for double indication for AC and DC, V and Hz, etc.
• True-RMS Measurements AC and AC+DC
• Wide AC Frequency bandwidth from 10Hz to 100kHz *
• True-RMS or MEAN value detection mode can be selected *
• Fast Peak Hold response time of 250µs
• Low-pass filter for motor drive measurements *
• Low Power Ω for resistance measurements on sensible electronic circuits by a low and safe test current*
• User calibration function

* Only for KEW 1062
Safety design for industrial use

• Complies with IEC 61010-1 CAT.III 1000V, CAT.IV 600V
• Terminal shutter to prevent incorrect test leads' insertion in current terminals
• Very wide operating temperature range from -20 to 55ºC

Reliable support for data management

• Large data internal memory

                KEW 1062: 10,000 data (logging), 100 data (manual)
                KEW 1061: 1,000 data (logging), 100 data (manual)

• Download data and Live Monitoring on a PC via the USB interface (Option for USB Communication set)

* MAX 32,767 data can be transferred.

Specification:

	KEW 1061	KEW 1062
Detection mode	RMS	MEAN/RMS (switch)
DC V	50.000/500.00/2400.0mV/5.0000/50.000/500.00/1000.0V (Input impedance: Approx. 100MΩ [50/500/2400mV], 10MΩ [5/50/500/1000V]) |±0.02%rdg±2dgt (Basic accuracy)
AC V [RMS]	50.000*/500.00mV/5.0000/50.000/500.00/1000.0V(* Only for 1062) (Input impedance: 11MΩ<50pF [50/500mV/5V], 10MΩ<50pF [50/500/1000V])
	±0.7%rdg±30dgt (Basic accuracy)	±0.4%rdg±30dgt (Basic accuracy)
AC V [MEAN] *	--	50.000/500.00mV/ 5.0000/50.000/500.00/1000.0V (Input impedance: 11MΩ<50pF [50/500mV/5V], 10MΩ<50pF [50/500/1000V]) |±1%rdg±30dgt (Basic accuracy)
DCV+ACV	5.0000/50.000/500.00/1000.0V (Input impedance: 11MΩ<50pF [5V], 10MΩ<50pF [50/500/1000V])
	±1%rdg±10dgt (Basic accuracy)	±0.5%rdg±10dgt (Basic accuracy)
DC A	500.00/5000.0µA/50.000/500.00mA/5.0000/10.000A |±0.2%rdg±5dgt (Basic accuracy)
AC A [RMS]	500.00/5000.0µA/50.000/500.00mA/5.0000/10.000A
	±1%rdg±20dgt (Basic accuracy)	±0.75%rdg±20dgt (Basic accuracy)
AC A [MEAN] *	--	500.00/5000.0µA/50.000/500.00mA/ 5.0000/10.000A |±1.5%rdg±20dgt (Basic accuracy)
DCA+ACA	500.00/5000.0µA/50.000/500.00mA/5.0000/10.000A
	±1.5%rdg±10dgt (Basic accuracy)		±1%rdg±10dgt (Basic accuracy)
Ω	500.00Ω/5.0000/50.000/500.00kΩ/5.0000/50.000MΩ
	±0.1%rdg±2dgt (Basic accuracy)		±0.05%rdg±2dgt (Basic accuracy)
LowPower-Ω *	--		5.000/50.00/500.0kΩ/5.000MΩ |±0.2%rdg±3dgt (Basic accuracy)
Continuity buzzer	500.0Ω (The buzzer turns on for resistances lower than 100±50Ω)
Diode test	2.4000V|±1%rdg±2dgt Open curcuit voltage: <5V (Approx. 0.5mA Measuring Current)
Capacitance	5.000/50.00/500.0nF/5.000/50.00/500.0µF/5.000/50.00mF |±1%rdg±5dgt (Basic accuracy)
Frequency	2.000~9.999/9.00~99.99/90.0~999.9Hz/0.900~9.999/9.00~99.99kHz |±0.02%rdg±1dgt (Basic accuracy)
DUTY	10~90%|±1%rdg
Temperature	-200~1372ºC|±1%rdg±1.5ºC -328~2501.6ºF|±1%rdg±2.0ºF (with the use of K-type Temperature probe)
Measurement functions	DC Voltage, AC Voltage, DC Current, AC Current, Resistance, Frequency, Temperature, Capacitor, Duty cycle ratio, Decibel (dBV, dBm), Continuity Check, Diode Test, LowPower-Ω *
Other functions	Data Hold (D/H), Auto Hold (A/H), Peak Hold * (P/H), Range Hold (R/H), Maximum value (MAX), Minimum value (MIN), Average value (AVG), Zero Adjustment (Capacitor, Resistance), Relative values, Save to Memory, LCD backlight
Withstand voltage	6,880V/5 sec.
Applicable standards	IEC 61010-1 CAT.IV 600V, CAT.III 1000V Pollution degree 2, IEC 61010-031, IEC 61326-1 (EMC)
Power source	R6P (1.5V)×4 (Auto power off: approx. 20 minutes)
Dimensions	192(L)×90(W)×49(D) mm
Weight	Approx. 560g (including batteries)
Accessories	7220A (Test leads), R6P×4, Instruction manual, 8926 (Fuse [440mA/1000V])×1 (included) 8927 (Fuse [10A/1000V])×1 (included)