Selasa, 19 April 2016

LUTRON DW-6095 3 Phase Power Analyzer, with harmonic measurement

 Darmatek Alat Ukur dan Instrument

LUTRON DW-6095 3 Phase Power Analyzer, with harmonic measurement

Description
Model : DW-6095
* Analysis for 3 phase multi-power system, 1P/ 2W, 1P/ 3W, 3P/ 3W, 3P/ 4W.
* 3 current probes ( CP-1201) are included, if change the current probes, the calibration procedures are not necessary.
* Current probe input signal/ range with selection :
Input signal ( ACV) : 200mV / 300mV / 500mV / 1V / 2V / 3V.
Ranges ( ACA) : 20A / 200A / 2000A / 30A / 300A / 3000A / 6000A.
* Meter can cooperate with other universal current probes.
* Complete set with 4PCs Test Leads, 4PCs Alligator Clips, 3PCs Clamp Probe ( CP-1201) , AC to DC 9V adapter, 2Gb SD memory and Carrying bag.
* Measurement :
V ( phase-to-phase) , V ( phase-to-ground) , A ( phase-to-ground)
KW / KVA / KVAR / PF ( phase)
KW / KVA / KVAR / PF ( system)
KWH / KVAH / KVARH / PFH ( system)

Phase angle
* Harmonic display ( 1-50th order) .
* Simultaneous display of Harmonics and Wave form.
* Display of Wave form with Peak Values.
* Analysis of Total Harmonic Distortion ( THD) .
* Graphic Phase diagram with 3-Phase system parameters.
* 3 phase Voltage and Current Unbalaced Ratio ( VUR, AUR) and Unbalanced Factor.
* Calculated Unbalaced Current through Neutral Line ( An) .
* Capture Transient events ( including Dip, Swell and Outage) with programmable threshold ( % ) .
* Programmable CT ratio ( 1 to 600) and PT ratio ( 1 to 1000) .
* ACV input impedance is 10 Mega ohms.
* Safety Standard : IEC 1010, CAT III 600V.
* Built-in clock and Calendar, real time data record with SD memory card, sampling time can be set from 2 to 7200 seconds. Just slot SD card into computer, all the measured with the time information ( year, month, data, hour, minute, second) can be downloaded to the Excel directly, the user can make the further data analysis by themselves.
* Powered by AA ( UM-3) DC 1.5V x 8PCs batteries ( Alkaline type) or DC 9V adapter.
* Computer data output, can cooperate with optional USB Cable/ USB-01, RS232 cable/ UPCB-02 and Data Aquistion software, SW-811, SW-E802.
* Optional current probes : CP-1201, CP-200, CP-2000, CP-2010, CP-3000, CP-6000 detailed specification, refer to page 41-44.
* User can order the meter only ( without current probes) with the special request if intend to cooperate their own current probes.
* Patent

0 komentar: